Megasat HD 3 Compact V3 satellite meter

Satellite measuring device HD 3 Compact V3

Measurement of satellite signals (DVB-S and DVB-S2) on a 2.7 inch screen. Compact design with all important measurement data on the display.

Fast and accurate satellite search
The HD 3 Kompakt V3 is a handy measuring device and ideally suited for a fast and accurate satellite search. It is possible to measure DVB-S and DVB-S2 (HD) signals. The built-in LCD display offers a screen diagonal of 2.7 inches (6.9 cm). Operation is child's play with the clear and well-structured screen interface. In the live measurement all important information such as satellite, transponder, C/N, BER and dBµV are displayed.

Spectrum analysis for troubleshooting
In order to evaluate the signal of the satellite system and to analyse possible reception errors, you can use the spectrum analysis which runs in almost real time. Due to the constantly updated display of the diagram, the spectrum is changed immediately when the mirror is moved.

Angle calculation for fast alignment
The angle calculation helps you to determine the vertical and horizontal angle of the antenna, because depending on the location the elevation and azimuth changes. Simply enter the location data and the meter quickly calculates the appropriate angle settings for the mirror. This makes it easier to find the desired satellite.

Transponder control
Transponder check is a function to simultaneously assess the signal strength and quality of multiple transponders. This is helpful for the calibration of Quattro LNBs. The transponders can be selected and switched through at will. The satellite signal is permanently updated in the process.

Technical data:

• Measurement of DVB-S /-S2
• 2.7 inch (6.9 cm) LCD color display (400 x 360 pixels)
• Optical and acoustic signal level display
• Mini-USB port for power supply and firmware updates
• Screw connector for easy change of F-jack
• Reset button
• Power supply: AC 100-240 V, DC 12 V, 1 A
• Li-Ion battery (7.4 V / 1,400 mAh)
• Frequency range: 950 - 2150 MHz
• Level range: 30 ~ 100 dBμV
• LNB voltage: 13/18 V, max. 400 mA
• LNB short circuit indication and protection
• Displays: PWR / C/N / MER / BER / Signal strength and quality
• DiSEqC 1.0 / 1.1 / 1.2 / USALS
• Auto DiSEqC function
• Unicable I & II (EN 50494 / EN 50607)
• Spectrum analysis
• Angle calculation of azimuth and elevation

• 1x Mini-USB
• 1x F-connector
• 1x DC 12 V input

• Satmeter HD 3 Compact V3
• 230 Volt power supply
• 12 Volt car charger
• Protective cover incl. carrying strap
• F-coaxial adapter
• Operating instructions