Lily Electric Ball Valve System - Plastic, 1 InchLily Electric Ball Valve System - 1 1/4 InchLily electric ball valve system - 40mm heated, incl. switchLily electric ball valve system - for tank direct connectionLily electric ball valve system - 40mm
Please select Design!
Plastic, 1 inch 1 1/4 inch 40mm heated, incl. switch for tank direct connection 40mm
Availability:
Available in up to 4 weeks
Availability:
Available in up to 4 weeks
Availability:
Available in up to 4 weeks
Availability:
Available in up to 4 weeks
Availability:
Available in up to 4 weeks
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| Quick and easy assembly | Safe and tight at the same time |
| Drinking water certified | Comfortably controllable |
Product description
conveniently opens, closes and drains (waste) water circuits
A unique combination of various patent-pending special functions ensures long-term reliability.
Anti-blocking automatic DBGM reg.
The motor is automatically switched off after 3 unsuccessful closing attempts
and thus protected from overheating or damage.
High discharge capacity DBGM reg.
The flow rate is optimized for flow circumference in many cases.
Shape (flowing and smooth transitions), opening (clear width) and material (surface finish particularly smooth)
leads to a high flow rate.
High-performance actuator DBGM reg.
A high-performance servomotor specially developed for the requirement drives
via a special gearbox, the opening and closing mechanism is actuated with 7 Nm.
Remotely controllable
conveniently controllable - and environmentally friendly
With changeover switch, the valves are connected in such a way that operation is only possible when the motor is switched off.
Repetitive closure DBGM reg.
A sensor detects obstacles during closing and stops the drive automatically.
The system then automatically reopens completely and closes again with momentum.
Manual emergency operation
The system can be operated manually in case of emergency (e.g. power failure).
Tip: To do this, pull out the small rotary wheel and turn it
Details
Lily electric ball valve system - plastic, 1 inch
A unique combination of various patent-pending special functions ensures long-term reliability.
Anti-blocking automatic DBGM reg.
The motor is automatically switched off after 3 unsuccessful closing attempts
and thus protected from overheating or damage.
High discharge capacity DBGM reg.
The flow rate is optimized for flow circumference in many cases.
Shape (flowing and smooth transitions), opening (clear width) and material (surface finish particularly smooth)
leads to a high flow rate.
High-performance actuator DBGM reg.
A high-performance servomotor specially developed for the requirement drives
via a special gearbox, the opening and closing mechanism is actuated with 7 Nm.
Remotely controllable
conveniently controllable - and environmentally friendly
With changeover switch, the valves are connected in such a way that operation is only possible when the motor is switched off.
Repetitive closure DBGM reg.
A sensor detects obstacles during closing and stops the drive automatically.
The system then automatically reopens completely and closes again with momentum.
Manual emergency operation
The system can be operated manually in case of emergency (e.g. power failure).
Tip: To do this, pull out the small rotary wheel and turn it
Details
Lily electric ball valve system - plastic, 1 inch
- Thread type: plug-in thread on both sides
- Connection: 1" female plug-in thread
- Material: LM T101 (PP), LMT 111 (PVC), LMT 107 (EPDM)
- Characteristics: Connection cable L0.8 m, change-over switch: 12 V, 10 A max., 4-pole
- Type of thread: plug-in thread on both sides with integrated O-rings for LILIE-pipe plug-in system-GRAUGELB 40mm
- Connection: connection cable L0,8 m, 2-wire
- Material: LM T101 (PP), LMT 111 (PVC), LMT 107 (EPDM)
- Thread type: plug-in thread on both sides with integrated O-rings for LILIE-pipe plug-in system-GREY-YELLOW 40mm
- Connection: 40 mm LILIE-pipe system
- Material: LM T101 (PP), LMT 111 (PVC), LMT 107 (EPDM)
- Connection: Connection for the LILIE-pipe plug-in system-Gray-YELLOW 40 mm with double O-ring. Ready for connection with 2 stainless steel adapters, gaskets and stainless steel screws
- Material: LM T111 (PVC), LM T107 (EPDM), LM T101 (PP), LM T105 (TPE), stainless steel,
- Thread type: screw thread on both sides
- Connection: 1 ¼", With connections
- Material: LM T150 (brass), LM T107 (EPDM)
Features
| Type of hose, pipe, valve | Outlet valve |
| Outlet diameter | 50 cm |
| Design | Plastic, 1 inch |
| Colour | gray/ yellow |
| Weight | 742 g |
| Dimensions (LxWxH) | 270 x 175 x 65 cm |
Features
| Type of hose, pipe, valve | Outlet valve |
| Design | 1 1/4 inch |
| Colour | yellow |
| Weight | 690 g |
| Dimensions (LxWxH) | 100 x 65 x 100 mm |
Features
| Type of hose, pipe, valve | Outlet valve |
| Outlet diameter | 40 mm |
| Design | 40mm heated, incl. switch |
| Colour | gray/ yellow |
| Weight | 288 g |
| Dimensions (LxWxH) | 100 x 65 x 125 mm |
Features
| Type of hose, pipe, valve | Outlet valve |
| Outlet diameter | 40 mm |
| Design | for tank direct connection |
| Colour | gray/ yellow |
| Weight | 700 g |
| Dimensions (LxWxH) | 110 x 145 x 110 mm |
Features
| Type of hose, pipe, valve | Outlet valve |
| Outlet diameter | 40 mm |
| Design | 40mm |
| Colour | gray/ yellow |
| Weight | 288 g |
| Dimensions (LxWxH) | 100 x 65 x 125 mm |
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
